Wednesday, February 26, 2014

Hello Friend–MFTWSC #165

MFTWSC165_2014feb26


Hey, there! It’s Wednesday noon so it must be time for this week’s MFTWSC! Are you ready? Here’s this week’s sketch. All of the details about the sketch challenge are available on the MFT blog as well as in the weekly newsletter. The Design Team will be on hand to provide plenty of inspiration to get you started.


MFTWSC165

Another great sketch from MFT!! I started with a Sweet Tooth card stock base then embossed a piece of Sweet Tooth card stock with LJD Spring Flowers Stencil, rounded the corner per the sketch, and popped it up on foam. Next I popped up an Open Scallop Doily Duo Die-namics cut from more Sweet Tooth card stock and Stamped with a sentiment from LJD Fall Foliage stamped with Black Licorice ink. I then added a strip of Grapesicle card stock cut with Fishtail Flags STAX Die-namics. Then I added some flowers cut from LJD Forget Me Not Die-namics and stamped with LJD Forget Me Not in Grapesicle ink, Lemon Drop ink, and Sour Apple ink and adhered them. I finished off with a few clear gems.

Another sentiment from LJD Fall Foliage is on the inside.


MFTWSC165_2014feb26in


And there you have it! That’s all from me today. Thanks so much for stopping by!


1CAS Supplies2






~Supplies~
Stamps:
LJD Forget Me Not, LJD Fall Foliage (MFT)
Ink:
Black Licorice ink, Grapesicle ink, Lemon Drop ink, Sour Apple ink (MFT)
Paper:
Sweet Tooth card stock, Grapesicle card stock (MFT)
Accessories/tools: Vagabond;
Open Scallop Doily Duo Die-namics, LJD Forget Me Not Die-namics, Fishtail Flags STAX Die-namics, LJD Spring Flowers Stencil (MFT); foam tape, clear gems, Corner Chomper 

1CAS Signature2

Thank You–CTD #281

CTD281_2014feb26


Hi, everyone! It’s Color Throwdown time and this week Monica has a bold and striking color combo for us to work with.



swatch 281

Since the colors were intense, I decided to go CAS with a lot of white space to balance it out. I started with a Sweet Tooth card stock base, then stamped LJD Forget Me Not in the challenge colors. The sentiment was made by cutting Thank You Die-namics from Black Licorice card stock and popped it up on foam. A few orange sequins finished it off.

The inside has a sentiment from Sending Thanks, stamped with Black Licorice ink.


CTD281_2014feb26in


And that’s it from me! Remember, you do not have to have the exact colors to play the
Color Throwdown challenge. If you don't, just use the closest you have. So, c'mon over to the Color Throwdown blog and play along with us this week. Please use the link service to post your card and please link directly to your card so we can find it easily. And please include a link in your post to the Color Throwdown. If you upload your card to a public forum, please use the keyword CTD281 so we can see your beauty all in one place. Hope to see you there! Be sure to check out what the other team members have come up with this week!

Barbara Anders (<--- You are here!)   
Broni Holcombe
Joan Ervin
Lori Tecler
Melody Rupple
Monika Davis
Tammy Hershberger
Vickie Zimmer
Wanda Cullen
Nicole Nastali– February Guest Designer

Thanks so much for stopping by today!



1CAS Supplies2








~Supplies~
Stamps:
LJD Forget Me Not (MFT)
Ink:
Orange Fizz ink, Lemon Drop ink, Black Licorice ink (MFT)
Paper:
Sweet Tooth card stock, Black Licorice card stock (MFT)
Accessories/tools: Vagabond;
Thank You Die-namics (MFT); foam tape, sequins


1CAS Signature2

Tuesday, February 25, 2014

Creative Stenciling–MFT February DT Creative Challenge

creativechallenge1_2014feb25


Hi, everyone! And welcome to MFT’s February Creative Challenge! The MFT Design Team Creative Challenge is a monthly feature where we are challenged to explore our creative side using a specific theme, product, or technique. This month, Creative Stenciling!  Look forward to an assortment of creations from today's participating designers as we create projects using MFT Stencils.  Be sure to check out the MFT Blog for a list of all the designers who have a project to share with you today.


Print

Along with some others on the MFT design team, I recently took an online class on stenciling and learned some pretty cool techniques. I couldn’t decide which ones to use today so I did three different ones to share with you.

First up is one of my favorite ways to just add some subtle interest and texture when you don’t want something really bold that will take away from your focal element. Embossing paste or modeling paste is super easy to use and really adds dimension to your project. I used it right out of the jar today but you can color it with ink if you want to go that way.

First of all, I taped my MPD Scallops stencil down on top of some Sweet Tooth card stock and masked off the general area I wanted to stencil.


creativechallenge1_2014feb25raw1

Then, with a palette knife, I spread the embossing paste over the stencil and onto my card stock.

creativechallenge1_2014feb25raw2

I like to sweep it off at an angle so some of the openings only get a touch of paste, to add interest—in other words, don’t fill each opening completely. BUT, the great thing about this product is that if you don’t like what it looks like, just scrape it off with your palette knife and start over—as long as you haven’t colored it.

creativechallenge1_2014feb25raw3

Then it’s just a matter of letting it dry and using it on your card. You can speed up the drying with a heat tool but be careful—embossing paste will bubble up if it gets too hot.

I then finished my card using some scraps of stamped paper I found in my stash—Grout Gray card stock stamped with Grout Gray ink and Striped Backgrounds, then stamped with a Black Licorice ink sentiment from Get Well Wishes and Sweet Tooth card stock stamped with Black Licorice ink and MPD Damask Designs. Then I added a Leaf-Filled Flourish Die-namics cut from Sour Apple card stock and an Upsy Daisy Die-namics flower cut from Orange Fizz card stock with a Chocolate Brown card stock center. I finished off with a few orange enamel dots.

The inside has another sentiment from Get Well Wishes.

creativechallenge1_2014feb25in
*****

My second card shows how you can create your own patterned paper with stencils.

creativechallenge2_2014feb25

I used Stripes Stencil and some Distress ink to make this paper. I like how you can get subtle shading with Distress inks so I chose two colors to work with. I simply taped the stencil down on my craft sheet on top of some Sweet Tooth card stock and sponged one color on. Then I turned the card stock 90 degrees and sponged on the other color.

creativechallenge2_2014feb25raw

To complete the card, I trimmed my new patterned paper down and matted it with Black Licorice card stock to ground it. Then I stamped the sentiment, from LJD Blissful Butterflies, on Black Licorice card stock with Sweet Tooth pigment ink and heat embossed with white embossing powder and popped it up on foam. I stamped a butterfly from the same set on a LJD Blissful Butterflies Die-namics cut from Orange Fizz card stock with Black Licorice ink and popped it up on foam as well, on top of some black hemp cord loops.

The inside has another sentiment from the set.


creativechallenge2_2014feb25in
*****

For my last card, I bubbled up the embossing paste on purpose.

creativechallenge3_2014feb25

I started with some Sweet Tooth card stock and MPD Damask Stencil. I only wanted to use the larger image so I masked off the rest and applied my embossing paste as usual.

creativechallenge3_2014feb25raw1


This is what I had when I pulled off the stencil. Gorgeous just like this, right?

creativechallenge3_2014feb25raw2

While it was still wet, I sprinkled on some silver embossing powder and heated it up. You’ll need to be careful to not burn it but you want to hold the heat on about as long as you do to emboss on paper and until you see the embossing paste bubble. You get incredible dimension with this technique and it almost looks like metal.

creativechallenge3_2014feb25raw3

To complete my card, I matted it with silver metallic card stock and popped it up on a Black Licorice card stock base. I cut a Banner Greetings Die-namics from Black Licorice card stock and stamped the sentiment, from Banner Greetings, with Versamark, then heat embossed with silver embossing powder and popped it up on foam.

Another Banner Greetings image was stamped on the inside with Black Licorice ink.


creativechallenge3_2014feb25in


And there you have it—three ways to use your MFT Stencils that you might not have considered. Thanks so much for stopping by today!


1CAS Supplies2

creativechallenge1_2014feb25


 

creativechallenge2_2014feb25






creativechallenge3_2014feb25






~Supplies~
Feel Better Soon:
Stamps:
Striped Backgrounds, MPD Damask Designs, Get Well Wishes (MFT)
Ink:
Grout Gray ink, Black Licorice ink (MFT)
Paper:
Sweet Tooth card stock, Grout Gray card stock, Sour Apple card stock, Orange Fizz card stock, Chocolate Brown card stock (MFT)
Accessories/tools: Vagabond;
Leaf-Filled Flourish Die-namics, Upsy Daisy Die-namics, MPD Scallops Stencil (MFT); foam tape, enamel dots, embossing paste

 

Hello Dear Friend
Stamps:
LJD Blissful Butterflies (MFT)
Ink:
Sweet Tooth pigment ink, Black Licorice ink (MFT); Dried Marigold, Worn Lipstick Distress Inks (Ranger)
Paper:
Sweet Tooth card stock, Orange Fizz card stock, Black Licorice card stock (MFT)
Accessories/tools: Vagabond;
LJD Blissful Butterflies Die-namics, Stripes Stencil (MFT); black hemp cord, embossing powder, heat tool, foam tape

 

Best Wishes
Stamps:
Banner Greetings (MFT)
Ink:
Black Licorice ink (MFT); Versamark
Paper:
Sweet Tooth card stock, Black Licorice card stock (MFT); metallic silver card stock
Accessories/tools: Vagabond;
Banner Greetings Die-namics, MPD Damask Stencil (MFT); silver embossing powder, heat tool, embossing paste, foam tape


1CAS Signature2

LinkWithin

Related Posts Plugin for WordPress, Blogger...